Test Training Available from Picotest
Did you know Picotest has published a variety of training aids for engineers looking to learn power supply and power integrity testing...
top of page
Search
The Simple Truth about Complex Impedance Probes
by Steve Sandler Originally presented at the 11th Power Analysis & Design Symposium (Live Virtual Event), March 9, 2022 Picotest Power...
Cable Shield Resistance Issue in a 2-port Impedance Measurement
November 15, 2021 Steve Sandler For this extreme measurement example, I selected a simple problem that has been widely published by...
DesignCon Digital 2021
October 5 & 6, 2021 "This online event from the producers of DesignCon features an education program with on-demand webinars presented by...
EDI CON Online 2021
Technical Session Available on demand The Influence of Connectivity on Low Impedance Measurements Presented by: Steven M Sandler,...
Calibrating the 2-Port Probe for Low Impedance PDN Measurements
May 18, 2021 Benjamin Dannan and Steve Sandler "High speed printed circuit board (PCB) design requires well designed power delivery...
App Note: 2-Port Impedance Measurement using the P2102A Probe and E5061B VNA
By Benjamin Dannan and Steven Sandler, Picotest.com High speed Printed Circuit Board (PCB) design requires well designed Power Delivery...
App Note: 2-Port Impedance Measurement using the P2102A Probe and ZNL6 VNA
By Benjamin Dannan and Steven Sandler, Picotest.com High speed Printed Circuit Board (PCB) design requires well designed Power Delivery...
App Note: 2-Port Impedance Measurement using the P2102A Probe and Copper Mountain Tech 2-Port VNA
By Benjamin Dannan and Steven Sandler, Picotest.com, and Subbaiah M. Pemmaiah, Coppermountaintech.com High speed Printed Circuit Board...
Power Integrity Assessment and Optimization in the Frequency Domain
IEEE MTT-S Latin America Microwave Conference: https://lamc-ieee.org/ Registration: http://bit.ly/lamc-2021-sandler Full Program:...
Picotest P2102A 2-Port Probe Calibration with the Copper Mountain VNA
This video looks at how to perform a full calibration on the Copper Mountain Compact 2-port VNA using the Picotest P2102A 2-port probe...
App Note: 2-Port Impedance Measurement using the P2102A Probe and Bode 100 VNA
By Benjamin Dannan and Steven Sandler, Picotest.com High speed Printed Circuit Board (PCB) design requires well designed Power Delivery...
Characterizing LED Performance with a Frequency Response Analyzer and Line Injector
This application note series by Steve Sandler explores the measurement of the dynamic resistance of an LED and how to create a usable...
Measuring a Scope Probe Requires Two Oscilloscope Channels and a Very Flat Signal Source
Oscilloscope users can also calibrate their passive oscilloscope probes, though the process is much less sophisticated and for lack of a...
Match impedances when making measurements
Recently, I used a shielded coaxial cable to measure power supply ripple and the results were even noisier than using an oscilloscope...
Why Network Analyzer Signal Levels Affect Measurement Results
When measuring a circuit or device with our network analyzers, engineers generally inject a signal and believe that the measured results...
FAQ #16: What Calibration Services do you offer?
What Calibration Services do you offer? Apart from warranty repairs, calibration and servicing, done directly at Picotest, we work with...
FAQ #8: Why do I have to calibrate my measurements? Isn’t the equipment calibrated?
Why do I have to calibrate my measurements? Isn’t the equipment calibrated? Yes the devices are calibrated, however for accurate results...
Blog: Blog2
bottom of page