Step Load

Aug 15, 20191 min read

Webinar: Measuring and Interpreting Impedance Data

Signal Integrity Webinar Series Title: Measuring and Interpreting Impedance Data Duration: 1 hour, 1 minute (Available On Demand)...

14 views0 comments

Jul 1, 20142 min read

Three Stability Assessment Methods Every Engineer Should Know About

Many engineers are familiar with the Bode plot as an effective stability assessment method. However, some authors suggest and even teach...

12 views0 comments

Mar 18, 20142 min read

Understanding Voltage Response Of An LC Circuit

For an undamped LC circuit excited by an AC voltage source through simple phaser equations, we come to see that the circuit becomes short...

12 views0 comments

Dec 10, 20131 min read

Troubleshooting Distributed Power Systems: Measuring Ripple (Part 7 of the ongoing series)

And by taking measurements across all three test domains, designers can trace power supply ripple-related problems back to root causes...

7 views0 comments

Oct 1, 20131 min read

Five Things Every Engineer Should Know About PDN

Keep it flat Most PDN books tell you that the best performing PDN impedance looks flat over frequency. That is because noise signals are...

12 views0 comments

Sep 26, 20131 min read

Oscilloscope Mistakes: #4 (Part 4 of 4)

The engineering community uses oscilloscopes more than any other piece of equipment, yet many of the published results are questionable...

1 view0 comments

Sep 18, 20121 min read

New Injector Supports Testing of POLs

High Fidelity POL Testing with the J2112A The J2112A: Faster, Non-Invasive, and High Fidelity POL Step Load Testing Testing the step load...

8 views0 comments

Aug 20, 20121 min read

Sharpen Rising and Falling Edges

Wherever you find a digital control signal, you find sharp rising and falling edges that need characterization. These edges occur on...

10 views0 comments

Sep 22, 20101 min read

Deconstructing the Step Load Response Reveals a Wealth of Information

What can be learned from the Step Load response and why we should care? When analyzing power circuits, engineers routinely evaluate the...

6 views0 comments