Measuring the Bulk Dielectric Constant (Dk) on a Microstrip with a TDR
by Benjamin Dannan and Steve Sandler Most modern circuit designs depend on accurate logic signals at the logic receiver. This assurance...
by Benjamin Dannan and Steve Sandler Most modern circuit designs depend on accurate logic signals at the logic receiver. This assurance...
November 15, 2021 Steve Sandler For this extreme measurement example, I selected a simple problem that has been widely published by...
Learn about the current state of Power Integrity analysis and test in the Space industry from PI Guru Steve Sandler. This video discusses...
By Brian Hostetler – HPE, Inc. This document explains the measurements made on a few different power rails on a printed circuit board...
By Benjamin Dannan and Steven Sandler, Picotest.com Control loop stability is critical to the performance of all systems, as it...
This video looks at how to perform a full calibration on the Copper Mountain Compact 2-port VNA using the Picotest P2102A 2-port probe...
Oscilloscope users can also calibrate their passive oscilloscope probes, though the process is much less sophisticated and for lack of a...
Recently, I used a shielded coaxial cable to measure power supply ripple and the results were even noisier than using an oscilloscope...